<![CDATA[clear crash memory srs xc60]]>Hello
I wanted to clear the SRS crash memory, but I keep getting an error. After completing the procedure, the error doesn't clear.
All airbags have been replaced with new, working ones.
There's only one active error (red) in the controller: SRS-B119343.
The other errors are stored but not active (yellow).
Can someone tell me what I'm doing wrong?!

IMG_6060.jpg

]]>https://forum.d5t5.com/topic/175/clear-crash-memory-srs-xc60RSS for NodeMon, 13 Jul 2026 09:12:17 GMTSat, 09 Aug 2025 21:19:15 GMT60<![CDATA[Reply to clear crash memory srs xc60 on Mon, 25 Aug 2025 07:55:00 GMT]]>To reset crash date in SRS you need first reset locked BCM, this can be done by using the OBD system to clear the stored crash date in BECM then run again SRS crash date reset using Vdash

]]>https://forum.d5t5.com/post/404https://forum.d5t5.com/post/404Mon, 25 Aug 2025 07:55:00 GMT<![CDATA[Reply to clear crash memory srs xc60 on Mon, 11 Aug 2025 11:12:13 GMT]]>I did everything as described, and the airbags were replaced. Only one error code remained, SRS-B119343. I'm still having trouble completing the Clear Crash SRS procedure. The car is connected to a 12.2V charger.

]]>https://forum.d5t5.com/post/389https://forum.d5t5.com/post/389Mon, 11 Aug 2025 11:12:13 GMT<![CDATA[Reply to clear crash memory srs xc60 on Sun, 10 Aug 2025 16:40:44 GMT]]>If I understand this article https://d5t5.com/article/srs-clearcrash correctly, you have to clear All other DTCs first.

]]>https://forum.d5t5.com/post/388https://forum.d5t5.com/post/388Sun, 10 Aug 2025 16:40:44 GMT