<![CDATA[P1 Call start fuel heater]]>Hello

Looking for remote start of the fuel heater my car has.

My heater has a timer function and works as it should. It also has AEM module and what I have read grounding pin 3 from Aem start the heater.

Only problem is how to enable
"call start of parking heater function"
I have not found that from vdash. I have flat subscription and pin code available. Picture is from vida.

IMG_20260121_171953_529.jpg

]]>https://forum.d5t5.com/topic/263/p1-call-start-fuel-heaterRSS for NodeSat, 17 Oct 2026 23:55:58 GMTThu, 29 Jan 2026 08:12:11 GMT60<![CDATA[Reply to P1 Call start fuel heater on Tue, 10 Feb 2026 19:34:48 GMT]]>Problem solved.

Software 30790219 loaded to CEM with vida, not to AEM.

Call start of parking heater changed and now I can start fuel heater with grounding pin 3. I use eberspächer remote controller.

]]>https://forum.d5t5.com/post/747https://forum.d5t5.com/post/747Tue, 10 Feb 2026 19:34:48 GMT<![CDATA[Reply to P1 Call start fuel heater on Sun, 01 Feb 2026 19:09:26 GMT]]>I have made support ticket a few months ago.

I have two AEM modules, other is from a car that has a working remote control. Both boxes send can commands when I ground pin 3. I think problem is CEM is not configured to listen that remote control command.

]]>https://forum.d5t5.com/post/734https://forum.d5t5.com/post/734Sun, 01 Feb 2026 19:09:26 GMT<![CDATA[Reply to P1 Call start fuel heater on Fri, 30 Jan 2026 13:40:58 GMT]]>After checking the install instructions in VIDA, I think the software is needed for the AEM and has nothing to do with "call start" shown in the CSC tab. You might want to create a support ticket and ask if vdash is able to help you.

]]>https://forum.d5t5.com/post/726https://forum.d5t5.com/post/726Fri, 30 Jan 2026 13:40:58 GMT<![CDATA[Reply to P1 Call start fuel heater on Fri, 30 Jan 2026 11:52:44 GMT]]>Volvo has advertized that package to all p1 cars

Aem+remote+software

https://www.volvopartswebstore.com/products/volvo/Remote-start-timer-appl-Remote-start--fuel-driven-heater/1117414/30790219.html?srsltid=AfmBOooZwOAubxuwuz8XxEEwN8dnvcGu-ygaeuMy2UjaE_PCbE_BRCTO

]]>https://forum.d5t5.com/post/725https://forum.d5t5.com/post/725Fri, 30 Jan 2026 11:52:44 GMT<![CDATA[Reply to P1 Call start fuel heater on Fri, 30 Jan 2026 07:01:43 GMT]]>@Jannek I checked the manual for your modelyear. Your car doesn't support remote start. So it's correct that vdash doesn't show this option.

]]>https://forum.d5t5.com/post/724https://forum.d5t5.com/post/724Fri, 30 Jan 2026 07:01:43 GMT<![CDATA[Reply to P1 Call start fuel heater on Thu, 29 Jan 2026 15:17:24 GMT]]>Thanks but there is only three options. I think Vdash people should activate that feature.

Disabled

Additional heater

Additional with timer

]]>https://forum.d5t5.com/post/723https://forum.d5t5.com/post/723Thu, 29 Jan 2026 15:17:24 GMT<![CDATA[Reply to P1 Call start fuel heater on Thu, 29 Jan 2026 13:57:11 GMT]]>Look under Clima and Heating.,There are the options for remote preconditioning or remote fuel heater start. But I'm not sure if this is available/working for P1s.

]]>https://forum.d5t5.com/post/721https://forum.d5t5.com/post/721Thu, 29 Jan 2026 13:57:11 GMT