Why is my D5 engine top torque mount out of line to the left of the bracket on the stabiliser bar. To stop it damaging the engine mount I have had to offset it by putting a 20mm spacer in? I have replaced all engine mounts for new proper mounts and vacuum system tested ok with gauge. I also have big vibrations at idle and 1600 to 2000 rpm.
I can't see anything obvious and this is driving me nuts. can anyone help please?

]]>https://forum.d5t5.com/topic/400/d5-engine-not-inline-with-stabiliser-bar-bracketRSS for NodeTue, 11 Aug 2026 23:43:36 GMTTue, 11 Aug 2026 14:32:09 GMT60