V50 P1 - Language change + key reprogramming without original key codes
-
Bonjour , je reviens sur lallumage des feux auto.
Pensez vous que je peux juste remplacer l'ampoule et non le bloc antibrouillard complet pour passer en feux de jour ?D'après gemini avec le changement de l'interrupteur et l'activation sur vdash ca devrait aller .
Quelles options s'affichent lorsque vous ouvrez « Configuration du véhicule » -> « Afficher l'ancien configurateur » -> « Éclairage » -> « Feux de croisement » ? Je vais aller voir de suite ce qui s'affiche
-
-
@Mustapha I currently don't have the time and patience to investgate this further, but if your car has a VIN where the last 6 digits are higher than 614383 it should be possible to enable automatic headlights. But you will need to do changes to the electronics besides changing the light switch. Turning the fog lights into DLRs is not possible. Adding a switch with pn 31318937 and a separate switch for the front fog lights might work, but it's possible that you get a DTC because the DLRs are missing. Get yourself a copy of VIDA and EWD(wiring diagrams) to do your own researches. VIDA can be found here in this forum. EWD is available here
The pin decoding sets the car in programming mode. This means the car is completely unusable. Everything goes dark and the doors can't be locked. You will also need to attach a powerfull charger while decoding. Decoding with Vdash can take up to 24 hours, but usually it shouldn't last longer than 8 hours. At least with a Super J2534 adapter. Other adapters will be slower. Of course you can pause the decoding at any time. You can also rent or buy a VDD from D5T5. Decoding via VDD shouldn't take longer than 30 minutes on most V50s.
-
Merci Schnappi pour ton retour ,
652630 c'est mon vin à la fin donc d'après ta réponse ça devrait le faire .
Je pensais qu'on pouvais remplacer les feux anti brouillard par des feux de jour .Si je comprends bien , une fois le pin décorer je peux paramétrer la voiture comme je le désire ? Où il faut acheter un ticket pour faire la modification des éclairages ?
Merci encore de ton aide -
@Mustapha You will need to pay for all configuration changes that can't be done with diagnostics commands. This means if you click on a specific module after connecting Vdash and are able to change something that way, it's for free. If you have to use the "advanced configuration" or "language" menu, you have to pay or buy a subscription. Depending on what options you want to change in total, it might be better to buy a FLAT CONFIG subscription which costs 69 Euros for the first year and includes all configuration changes that are possible. Otherwise single configuration changes usually cost between 19 and 99 Euros depending on what you want to change.
Prices
