Thank you for Download links.
I mainly specialise with engine ECUs cloning and repairs I have a bit clue how to solder, and I have a professional tool to do it but I don't have many experiences with Airbags
my Programmer SVOD4 doesn't like Airbags but its excellent with ECUs.
For Airbag crash date I am using CG100X but there is no cloning option
if you struggle with soldering I more than happy to help I was ordered genuine UPA Programmer from their website with newest script catalogue, so I hope I going to sort this SRS and make some money on this vehicle

A możesz sprawdzic can czy szyna jest sprawna masz oscyloskop bo z bledow wynika ze nie gada sterownik silnika z abs.
Mozesz zczytac logi statyczne i dynamiczne w momencie wystepowania bledu?

What caind of battery support unit you use?. If you use bad battery charger you may dammage you battery or even worst baked your BCM.
Just check if the battery still holding power

Thank you

NEC IC 70F3466GC

UPA-USB programmer is a worthing to get?
I have CG100X but it won't work with Volvo 100% crash date I clear in Volvo cars make wors then was I have one Volvo xc60 to clone srs but i can't find any good programmer
can you check if UPA can clone
Volvo P/N P31406637
Bosch P/N 0 285 012 268
thank you

Jeżeli ładowanie masz poprawne to podczas jazdy akumulator jest tylko doladowywany a prad brany z alternatora akumulator dziala wtedy tylko jako kondensator.
Jeżeli problemy wystepuja podczas jazdy w danych predkosciach ja bym szukal przyczyny w czujnikach. A nie masz moze zjechanych opon badz jakims cudem innego rozmiaru profilu jednego koła wiem ze glupie pytanie ale sie zdarzało

@2009-S80-T6-Owner
Thats correct.
May i know what type of tool you using?

you need to clone whole of the data from original unit ( MC9S12XDT256VAL ) to the donor,
make sure you erase donor 16 Bit Microcontroller ( MC9S12XDT256VAL ) before writing original data

ok so that's change everything. with U300000 you want to be able to clone your original SRS it must be done on the bench. what is your original part number

@2009-S80-T6-Owner
If you have original srs unit with crash date leve in the car plug in obd scanner and go to BCM and restore crash date than connect Vdash and go to srs module and choose crash date reset then run the process and it should work

To reset crash date in SRS you need first reset locked BCM, this can be done by using the OBD system to clear the stored crash date in BECM then run again SRS crash date reset using Vdash

@2009-S80-T6-Owner
all so its highly recommend using same module as original one same part number or it want work you are cloning only to the same part number unit.

@2009-S80-T6-Owner
Hi there configuration is not a coding you need to clone your used SRS

solved my problem, after i repaired all deployed airbags i did crash reset by CG100X and i get crash date and ABS fault so i make worst, didn't notice that i messed up with ABS as well i thought ABS was replaced without coding before i bought this vehicle from the auction.
so, after many days of fighting with this vehicle i removed SRS module and restore eeprom to previous settings with crash date and then run crash date with vdash again and then bang all sorted all faults gone ABS and SRS back to normal.

kolego a sprawdzałeś czy nie jest uszkodzony jeden z pierścieni prędkości kola, wyciąg indywidualnie czujniki z poszczególnych kol przekręcaj piasta i patrz przez dziurkę od czujnika czy nie jest uszkodzony pierścień

Hi guys.
Did anyone knows how i can clone or code second hand BCM to my XC90 2010 that one what is located behind glove box. There is no option in vdash any best tool to do the job.

Thank you for any help.

@D5T5-David Hi David.
thank you for your replay i just seen your text i though you guys dont going to reply, can you tell me when i can find ticket ID please.

I bought from vdash srs configuration 99€ and it does nothing wasted the money i messange them but looks like they don care no reply.