DTC DIM-U300045
-
Hi, this DTC occurs when the DIM firmware actually IS modified. We have seen several DIMs like that, and once the proper(OEM, untouched) DIM firmware is reloaded, the original mileage appears.
In your case, we can just check your DIM - when possible - do the "Clone DIM" operation in VDASH, but only the first (read) part of it, then just cancel writting. Later, I will review/compare your firmware.
Pavel
-
Hi, found your DIM readout. That file IS modified, your "mileage" is 193xxx km. but the DIM reports no values for other units. I have prepared the correct file for your DIM that should reveal the truth, if you like.
Once loaded, the DTC should disappear and the (now hidden) mileages from ECM, DDM, PDM, SRS, BCM and CEM should appear there.
Pavel
-
Many Many Many THANKS Pavel!!!!Really appreciate your kindness and help!!!
I have done as You suggested and loadet the new orig software and it works fine!!!(I bought this car defective with water in the engine Ecu and before I wasn't know that vdash exist so I brought the old ecu to a locksmith to clone but no more so so how my story started)
Have nice weekend!!!!
Best regards,
Josef :0) -
Hello guys,
Got another one with the DIM-U300045 DTC. I bought it used and it has the DIM menu in Romanian. The car itself was brought from the Netherlands, so there is no way they delivered it like this from the factory - for sure some "handy" guy fiddled with it.
Having done the DIM read, would I be able to have a look in the dump and maybe figure it out or could one of you help me ? -
@D5T5-ok2ucx said in DTC DIM-U300045:
Hi, this DTC occurs when the DIM firmware actually IS modified. We have seen several DIMs like that, and once the proper(OEM, untouched) DIM firmware is reloaded, the original mileage appears.
In your case, we can just check your DIM - when possible - do the "Clone DIM" operation in VDASH, but only the first (read) part of it, then just cancel writting. Later, I will review/compare your firmware.
Pavel
do you you attain the original and load it. Need 31499926
-
Hello.
Adaptive cruise control problems? (XC60 2016 D4)
I got a fault code DIM-U300045.
I can only use the cruise control for about 7 minutes, then it turns off, saying it can't be used. I had the mileage reset, how can I restore the DIM. I cloned the DIM -
@Gorky571818 This code has nothing to do with your problem. There is most probably a CVM code for a misaligned FSM present in your car.
-
I only have one error dim. and I found out that the mileage was reset from 150k to 120k, how can I reset everything back?
-
Maybe someone can help here?
