Disable Start/ Stop Volvo XC90
-
First you need to decode the CEM pin. To do this, you need a battery charger capable of maintaining a constant load of 12 Ampere, a good DICE clone, or a Mongoose JLR pro, or a Super J2534 adapter(recommended), a Laptop with internet access and lots of patience, as this process can take up to 24 hours. The decoding can be paused and resumed any time. The decoding progress is stored on the Vdash servers. Once you finished the decoding, you simply click on the configuration button in Vdash, select disable Start-/Stop, buy the credits that Vdash asks for, click the green button on the right lower corner after the payment was successful, wait for the programming to finish(charger attached to the battery while doing this!), and you are done.
Whenever you visit a volvo dealer, you have to revert all changes done with Vdash. https://d5t5.com/article/vida_software _download_failed_car_blocked
