V50 P1 - Language change + key reprogramming without original key codes
-
Bonjour je viens de recevoir mon câble et installer les pilotes . J'arrive a communiquer avec vdash c'est génial
Cependant dois je attendre un ticket via le site où je peux payer directement quelque part sur le logiciel ?
Une personne m'avais parler de 29 euros .
Or sur le logiciel vdash ça me demande une facture de 39 euros
Merci a vous -
@Mustapha Changing the language costs between 0 and 150 Euros, depending on the car, language and if it requires just sending a simple diagnostic command, or if loading new software to the car is needed. See the pricelist here https://d5t5.com/article/subscription-types-prices
On your car it's loading new software.
If 39 Euros is shown, it's the correct price for your car. Depending on the payment method, additional service charges might be added.
Payment can be done through Vdash. Just buy the required Credits by clicking on the money symbol in the top right corner. -
Je vais tenter de me reconnecter demain si je peux le faire sans passer par quelqu'un. On peut payer par PayPal ?
Savez vous si on peut également ajouter l'allumage des phares en automatique ? Je possède le capteur de pluie sur ma v50 .
Merci de votre retour -
@Mustapha Paypal is available, but costs a little extra fee.
Automatic light needs the sunlight sensor in the middle of the dash board
and maybe also a different light switch. You can check if activating this option is available for your car by checking the advanced configuration options, but before you actually change that option, you need to check that all hardware required is installed in your car. Vdash doesn't have an automatic check for this. -
-
@Mustapha You will need different light switch that looks like this for example
There are 3 different types of this switch.Headlights on in Pos.0 is something different. In some countries it's a legal requirement to drive with headlights on all the time. The configuration for "headlights on in Pos.0" will result in the headlights turn on in all switch positions whenever the engine is running. The light sensor has nothing to do with this. You just won't be able to use the highbeam in Pos. 0 and parking light, and you will drive around with headlights on all the time.
Automatic headlights on/off is meant for cars model year 2011/2012 with Xenons/ABLs and installed daylight running lights, and works by switching the light switch to Pos. "A" in combination with the sunlight sensor. If this works on cars without DRLs and with Halogens is unknown to me.
What options do see when you open "Car configuration" -> "Show old configurator" -> "Lighting" -> "Dipped Beam"
-
@Mustapha As the complete switching on/off by sunlight sensor is done by the LSM (light switch module) you might just try to find a used switch that has the same buttons and regulators as the current switch plus the "A" positon and install that. There might be no configuration change needed at all. Just another switch.
️