Adding a XC70 P3 key

[Ciasto]

Hi
Can someone explain to me the exact procedure for adding a new key to a 2015 Volvo XC70 P3 in Vdash?
I've tried several different methods, but nothing works.

[T5 T6 Schnappi]

@Ciasto first off all is your car keyless or not, and have you bought a fob with the correct frequency for your car?

[Ciasto]

Hi
Yes, it's keyless.
I bought two keys, a 433 (Google suggested) and a 913 (probram suggested), and neither worked.

[T5 T6 Schnappi]

@Ciasto to program keyless fobs with Vdash you need the KVM IMMO pin. This pin can't be cracked. The only way to get this pin is to remove the KVM module from the car and read the pin "on the bench" with special tools and software.
Your other option would be pairing a non-keyless 5-button fob. This is possible without the KVM IMMO pin.
The correct frequency is shown by Vdash. It should be 902 MHz for US cars.
You also need to crack the CEM and IMMO pin (not the same as the KVM IMMO pin) before you can add any keyfob. This is possible with Vdash.
In short
Adding 5-button fob - > CEM pin, IMMO pin needed, no keyless function
Adding 6-button fob - > CEM pin, IMMO pin, KVM IMMO pin needed
Your only alternative to add a keyless fob is a legit VIDA subscription which should be accessible to you, if you live in the US Here

[T5 T6 Schnappi]

@Ciasto I forgot something important. If you add a keyfob with VIDA all changes done with vdash will be reverted.