Adding a XC70 P3 key
-
-
-
@Ciasto to program keyless fobs with Vdash you need the KVM IMMO pin. This pin can't be cracked. The only way to get this pin is to remove the KVM module from the car and read the pin "on the bench" with special tools and software.
Your other option would be pairing a non-keyless 5-button fob. This is possible without the KVM IMMO pin.
The correct frequency is shown by Vdash. It should be 902 MHz for US cars.
You also need to crack the CEM and IMMO pin (not the same as the KVM IMMO pin) before you can add any keyfob. This is possible with Vdash.
In short
Adding 5-button fob - > CEM pin, IMMO pin needed, no keyless function
Adding 6-button fob - > CEM pin, IMMO pin, KVM IMMO pin needed
Your only alternative to add a keyless fob is a legit VIDA subscription which should be accessible to you, if you live in the US Here -
@T5-T6-Schnappi Thank you for the comprehensive information.
I live in Poland
I forgot something important. If you add a keyfob with VIDA, all changes made with vdash will be reverted. -
@T5-T6-Schnappi Will all changes be reversed, including the change from miles to kilometers, for example, or will the light settings to European ones also be changed?
-
@Ciasto all configurations that are stored in the CEM will be reverted. If you did a market change, the car will be reverted to it's original market. As long as the VIN is still connected to your account and hasn't been connected to another Vdash account, all options for doing these changes again should be unlocked/useable without having to pay again. Changes you did via the engineering mode of the Sensus won't be affected. Changes done via Vdash will be reverted. This means all configuration changes, retrofits, market changes, added keys and so on. Installed tunes will only be overwritten if a software update is performed on the ECM.
