Enable Active High Beam
-
Hello @T5-T6-Schnappi and thanks for all the responses and information. But unfortunately I don’t know what comes with my car.
Can you tell me a way to figure out that?I thought with the VIN was enough.
Thanks again!
L -
@bochenn The VIN is not enough. It's not fully shown to other users, and even if it was shown in full, it would only be useful for users, who have access to a legit subscription of VIDA which is not possible for private users, except in the USA. You either have to connect the car to Vdash at least once, and then tick the box to add your car configuration when you make a post. Or you simply make a photo of the upper middle black area of your windscreen above the rearview mirror and upload it here.
This area. This photo is for example without the FSM.
Your car also needs to have Xenon headlights, as cars with Halogens don't have the required height sensors. -
Hey @T5-T6-Schnappi !
Thanks for the clarification. Let me answer by part:
1- I just got the mongoose cable to scan my XC60, so I will give a try over the weekend with VDash (if you can point me in the right direction where to look I'll be more than happy).
2- A while ago I downloaded a sheet with all the features that comes with my car, I'm sharing with you as screenshots some of the lines that mention lights.
3- Also I'm sharing a photo the upper middle black area of my windscreen. Can't tell if that has FSM or not. Also I can confirm it comes with Xenon HID headlights.
Thanks,
Leandro


-
@T5-T6-Schnappi, I forgot to add the photos.

-
@T5-T6-Schnappi thanks!

here is the schematic of all modules involved for AHB. 7/119 and 7/121 are the height sensor at the front and rear axle.