Changed configuration, now VDASH and VIDA report different values. Is this normal?

[Shawn327]

Hi. 2010 XC60 T6 USA. I decoded my pin and updated the configuration, modifying the "tyre circumference" parameter from 2250mm to 2395mm. After making the change successfully in VDASH, I reloaded my configuration in VITA just to check it, and VIDA reports the tyre circumference as 2210mm.

Do you all check your configuration changes against VITA, and do they match? I'm concerned that VDASH has entered a value that is not compatible with my car and now I don't know which number to trust.

[Arnis2002]

VIDA shows the factory configuration instead of the current one

[Shawn327]

I believe that VIDA 2014D is reading the CEM each time and displays the current values. Note that the value that VIDA displays changes after I change the value using VDASH, it just doesn't change to the same/right value.

[T5 T6 Schnappi]

@Shawn327 If you're refering to VIDA2014D. Than not all changes are shown or correctly decoded by this outdated version. This is normal and nothing to be concerned about as long as the changes you have made are working as expected and you don't get DTCs about incompatible configuration. You just need to keep in mind that visiting a Volvo dealer and getting software updates/reloads with the official VIDA will revert all changes made with Vdash. This means configurations, tunes and keys that you added.