Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
Collapse
Forum Logo

Volvo S60 2014

Scheduled Pinned Locked Moved P3 (V40II, V40CC, S60II, V60, XC60, V70III, XC70III, S80)
3 Posts 2 Posters 19 Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • S Offline
    S Offline
    sizan
    wrote last edited by
    #1

    Hi.

    I have this Volvo S60 D4 ( 2014 ), and when I tested it with DiCE, i have this error:

    CEM-U030141 - Software incompatibility with ECM/PCM - Sistem internal failures - General CheckSum Failure.

    any ideea guys, how can it be fixed?

    10x a lot !

    1 Reply Last reply
    0
    • T5 T6 SchnappiT Offline
      T5 T6 SchnappiT Offline
      T5 T6 Schnappi
      wrote last edited by
      #2

      This indicates that your car has a tuning or modified software installed on the ECM. Most probably a so called EGR delete as your car is a diesel. Some info here: https://d5t5.com/article/zname-dtc-po-uprave-vykonu You can visit an official volvo dealer and ask for a software reload for the ECM with VIDA to revert to the original software, but I can't recommend this, as you will have lots of other problems afterwards,because there are most probably have been done some more modifications to your car. For example a blanking plate for the EGR, or maybe even the DPF is removed.

      1 Reply Last reply
      1
      • S Offline
        S Offline
        sizan
        wrote last edited by
        #3

        No, the DPF is not removed ( checked ) and the EGR and the cooler we're changed at a volvo dealer in Sweden as the volvo dealer showed me on the computer and i have the operations mentioned on the car book.

        interesting info about the blanking plate for the egr, i will check 🙂

        One more question : it seems that i have some problems with the fact that the air is not venting corect and as before. So, no error about the CCM whatsoever, but if I try to calibrate the damper motors, looks like it is done all ok, but the values are all wrong. ( ex : recirculation motor preset range 810 steps, actual range 3075 steps ) and so.

        Is it possibile that vida will not show the ccm errors cause that ECM issue? maybe I am missing some other errors about the car..

        1 Reply Last reply
        0

        • Login

        • Login or register to search.
        All for your Volvo
        • First post
          Last post
        0
        • Categories
        • Recent
        • Tags
        • Popular
        • Users
        • Groups
        All for your Volvo