Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
Collapse
Forum Logo

Volvo S60 2014

Scheduled Pinned Locked Moved P3 (V40II, V40CC, S60II, V60, XC60, V70III, XC70III, S80)
5 Posts 2 Posters 61 Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • S Offline
    S Offline
    sizan
    wrote last edited by
    #1

    Hi.

    I have this Volvo S60 D4 ( 2014 ), and when I tested it with DiCE, i have this error:

    CEM-U030141 - Software incompatibility with ECM/PCM - Sistem internal failures - General CheckSum Failure.

    any ideea guys, how can it be fixed?

    10x a lot !

    1 Reply Last reply
    0
    • T5 T6 SchnappiT Offline
      T5 T6 SchnappiT Offline
      T5 T6 Schnappi
      wrote last edited by
      #2

      This indicates that your car has a tuning or modified software installed on the ECM. Most probably a so called EGR delete as your car is a diesel. Some info here: https://d5t5.com/article/zname-dtc-po-uprave-vykonu You can visit an official volvo dealer and ask for a software reload for the ECM with VIDA to revert to the original software, but I can't recommend this, as you will have lots of other problems afterwards,because there are most probably have been done some more modifications to your car. For example a blanking plate for the EGR, or maybe even the DPF is removed.

      1 Reply Last reply
      1
      • S Offline
        S Offline
        sizan
        wrote last edited by
        #3

        No, the DPF is not removed ( checked ) and the EGR and the cooler we're changed at a volvo dealer in Sweden as the volvo dealer showed me on the computer and i have the operations mentioned on the car book.

        interesting info about the blanking plate for the egr, i will check 🙂

        One more question : it seems that i have some problems with the fact that the air is not venting corect and as before. So, no error about the CCM whatsoever, but if I try to calibrate the damper motors, looks like it is done all ok, but the values are all wrong. ( ex : recirculation motor preset range 810 steps, actual range 3075 steps ) and so.

        Is it possibile that vida will not show the ccm errors cause that ECM issue? maybe I am missing some other errors about the car..

        1 Reply Last reply
        0
        • S Offline
          S Offline
          sizan
          wrote last edited by
          #4

          no opinions?

          T5 T6 SchnappiT 1 Reply Last reply
          0
          • T5 T6 SchnappiT Offline
            T5 T6 SchnappiT Offline
            T5 T6 Schnappi
            replied to sizan last edited by
            #5

            @sizan CEM/ ECM error and CCM problems are not related to each other. You can try to perform LIN discovery and recalibrate damper motors afterwards. Are there really no DTCs in the CCM? Incorrect step values should produce a DTC.

            1 Reply Last reply
            0

            • Login

            • Login or register to search.
            All for your Volvo
            • First post
              Last post
            0
            • Categories
            • Recent
            • Tags
            • Popular
            • Users
            • Groups
            All for your Volvo