immobilizer off
-
-
This post is deleted!
-
@Mir-21 there is no way to disable or circumvent the immobilizer with vdash.
If all keyfobs for the car are missing, you can decode the CEM pin and IMMO pin and simply add new fobs to the car. (except keyless ones).
If the existing fobs don't work anymore, you need to replace the immobilizer antenna. Here https://parts.volvocarsofmarietta.com/a/Volvo_2010_V70-32l-6-cylinder/_51513_5697318/Ignition-switch/GR-366172.html?assemblySearchGuid=98B8BC63-0131-492B-97AC-D9261C5D2F42 you can find the part numbers.
If your car was involved in an accident, your car is in“ crash mode“ and won't start. In this case you have to replace all airbags that were deployed, and than you can use vdash to get your car back to live.
-
Thank you T5 T6 Schnappi.
In vida I get all parameter ok exept 2 which I think its the problem,
ECM -control module voltage ........................................0.11 V
ECM-battery voltage......................................................0.06 V
are these normal?or its because of immobilizer on?
thank you again -
Hi, In Vida go to the “information” heading at the top, then “Product specification”, the “Specifications Other” then any module you care to expand has “Description of Parameters”. There you can see the parameter ranges and define if the values you are receiving are within, or out of range.
