Did you checked on the home page after connecting the car if the PIN decoding is possible? For some reason sometimes PIN, or IMMO decodings are defined as not possible.

Hi I suppose you are talking about the "fast" AI powered decoding, and the standard slow options. I also was not able to figure out how to activate the fast option, so used the standard one and in about 7 hours, the CEM was decoded. Doesn`t matter if you purchase the unlimited changes for your car, before decoding the CEM you will not be able to make any changes which require writing into the CEM.

Have you tried to unplug the battery for few minutes and try start the car again? Also is your charger showing the voltage, or did you seen in Vdash what was the voltage during the process?

Hi, In Vida go to the “information” heading at the top, then “Product specification”, the “Specifications Other” then any module you care to expand has “Description of Parameters”. There you can see the parameter ranges and define if the values you are receiving are within, or out of range.

Hi and thanks for the reply! Created a ticket, so now waiting to see if there will be response from the VDASH team.

This is what I thought as well. Thank you for the confirmation!

Hi again, yesterday I made the retrofit and I can say the the process went well.
But, 2 things:

• still receiving the same error code
• the mileage is now about 5K km more

For the mileage, I was expecting it, as after a paid check it turned out that the car left Italy at around 160K km, but during the registration in Bulgaria, was on 126K.

So 2 questions here what`s wrong with the mileage and why still receiving the DIM error?

Thanks in advance!

Hi all,

I have finished the decoding of my V40, but where can I find the CEM PIN if I need to use it further?

I have seen that if I use the AI option, it will be faster, but the Vdash team will keep the PIN for themselves, but if I use the standard "slow" method, the PIN should be provided.

Is there anywhere I can find the PIN, or my understanding is wrong?

Thank You!

Hello, what software you have used for the retrofit - p3tools or VDASH?
Also did you had the error before the retrofit?

@T5-T6-Schnappi Thank you for the advice! Why not to do the retrofit? Is there any risk for not functioning, or not working at all?

Hello again, just to check if someone can help...
Also I`m planning to install a TFT odometer (already have it, just the additional cable is the problem). Is that going to fix the error code and show the real mileage?

Hello,

I`m constantly receiving the DIM-U300045 error code considering that my mileage has been manipulated, as I have checked with CarVertical and it appeared that around 50K km "dissapeared" in my calculations. Is there a way to fix that, what will be the price for it, and will the odometer show the real mileage after the fix?
Thank you in advance!